Basic Info.
Function
Automatic Control, Protection
Certification
RoHS, CCC, ISO: 9001, CE
Product Description
HSV-180AS SERIES OVERVIEWHSV-180AS digital AC spindle servo drive is a high-voltage feed drive based on HSV-18S. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability.
HSV-180AS digital AC spindle servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC spindle servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.FEATURES1. High Performance AC digital Spindle servo drive
2. Easy and flexible control (five control modes)
3. Full state display
4. Various interface and control modes
5. Applicable to situations that requires high speed and high power
6. Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system
DIMENSIONThe following figures show the installation dimensions of HSV-180AS series servo drives.
1.Figure 3-2 Dimension and size of HSV-180AS-, 035, 050, 075 (without auxiliary devices Unit: mm)
Figure 3-3 Dimension and size of HSV-180AS 035, 050, 075 (with auxiliary devices Unit: mm)
2,Figure 3-4 Dimension and size of HSV-180AS-,100, 150 (without auxiliary devices Unit: mm)
Figure 3-5 Dimension and size of HSV-180AS-100,150 (with auxiliary devices Unit: mm)
3,Figure 3-6 Dimension and size of HSV-180AS-,200, 300,450 (without auxiliary devices Unit: mm)
Figure 3-7 Dimension and size of HSV-180AS-,200, 300,450 (with auxiliary devices Unit: mm)
PARAMETERS
Description
Type | HSV-180AS-035 | HSV-180AS-050 | HSV-180AS-075 |
Maximum power of applicable Motor(KW) | 3.7KW | 5.5KW | 5.5KW | 7.5KW | 7.5KW | 11KW |
Rated output current (A) | 16.8 | 21.9 | 31.4 |
Short-time Peak Current (A) | 22 | 28 | 42 |
Circute breaker(A) | 25 | 32 | 32 | 40 | 40 | 63 |
conector(A) | 18 | 25 | 25 | 32 | 32 | 40 |
Input exchange reactor | Current (A) | 10 | 15 | 15 | 20 | 20 | 30 |
Inductance (mH) | 1.4 | 0.93 | 0.93 | 0.7 | 0.7 | 0.47 |
Input filter(A) | 10 | 15 | 15 | 20 | 20 | 30 |
Maximum braking resistor (A) | 25 | 25 | 40 |
Recommended Braking resistor | Resistor (Ω) | 51Ω | 51Ω | 27Ω |
Power (W) | 1500W | 1500W | 2000W |
Quanlity | 1 | 1 | 1 |
Recomand value of main circute cable (mm2) | 4 | 4 | 4 | 4 | 4 | 10 |
Type | HSV-180AS-100 | HSV-180AS-150 | |
Maximum power of applicable Motor(KW) | 11KW | 15KW | 18.5KW | 22KW | |
Rated output current (A) | 43.8 | 62.8 | |
Short-time Peak Current (A) | 56 | 84 | |
Circute breaker(A) | 63 | 63 | 100 | 100 | |
conector(A) | 40 | 50 | 63 | 80 | |
Input exchange reactor | Current (A) | 30 | 40 | 50 | 60 | |
Inductance (mH) | 0.47 | 0.35 | 0.28 | 0.24 | |
Input filter(A) | | 40 | 50 | 65 | |
Maximum braking resistor (A) | | 75 | |
Recommended Braking resistor | Resistor (Ω) | 33Ω | 27Ω | |
Power (W) | 1500W | 2000W | |
Quanlity | 2 | 2 | |
Recomand value of main circute cable (mm2) | 10 | 16 | 16 | 25 | |
| | | | | | | |
Type | HSV-180AS-200 | HSV-180AS-300 | HSV-180AS-450 |
Maximum power of applicable Motor(KW) | 30KW | 37KW | 51KW | 75KW |
Rated output current (A) | 85.7 | 125 | 170 |
Short-time Peak Current (A) | 110 | 168 | 224 |
Circute breaker(A) | 125 | 160 | 200 | 400 |
conector(A) | 95 | 115 | 150 | 250 |
Input exchange reactor | Current (A) | 80 | 90 | 150 | 250 |
Inductance (mH) | 0.17 | 0.16 | 0.095 | 0.056 |
Input filter(A) | | 100 | 150 | 250 |
Maximum braking resistor (A) | | 100 | 150 |
Recommended Braking resistor | Resistor (Ω) | 30Ω | 30Ω | 30Ω |
Power (W) | 2500W | 2500W | 2500W |
Quanlity | 3 | 4 | 6 |
Recomand value of main circute cable (mm2) | | 70 | 120 |
Specification
Input power | Rated voltage, Rangeof voltage fluctuation Frequency | 150A and below specifications:Three-phase AC380V -15%~+10% 50/60Hz 200A and above Specifications: 1.Single phase AC220V control power -15%~+10% 50/60Hz 2.Three-phase AC380V strong power -15%~+10% 50/60Hz |
Control modes | Position control,External speed control,JOG control,Internal speed control |
Characteristic | Speed frequency response | 300Hz or higher |
Speed volatility | Lower than 5r/min (load 0%~100%) |
Speed range | 1r/min~12000r/min |
Constant power range | 1:4 |
Position control | Types of pulse command | Direction + pulse train CCW pulse +CW pulse Two-phase A / B quadrature pulse |
Form of pulse command | Non-insulated wire drive(about +5V) |
Frequency of pulse command | ≤500kHz |
Speed control | Types of pulse command | Direction + pulse train CCW pulse +CW pulse Two-phase A / B quadrature pulse |
Form of pulse command | Non-insulated wire drive(about +5V) |
Frequency of pulse command | ≤500kHz |
Analog command | DC 0~+10VorDC -10V~+10V |
Acceleration and deceleration function | 0.1~180seconds |
Type of spindle motor encoder | TTL composite incremental photoelectric encoder:1024line,2048line,2500line Sine and cosine incremental encoder:256line Absolute encoder:ENDAT2.1/2.2 Protocol encoder(EQN1325/EQN1313) |
Spindle encoder encoder type | Optical encoder (TTL) Sine and cosine analog signal(1Vpp) |
Input and output Signal | Control input | Run enable Alarm clear Forward and reverse running enable Spindle orientation ready Control modes switch Indexing incremental orientation ratio input selection |
Control output | Spindle ready Spindle alarm Spindle orientation-finished Speed-reached Zero-speed reached |
Spindle function | Spindle orientation | Accuracy:±1pulse;Position adjustment:Parameter setting |
Rigid tapping | Tapping deviation:±2% |
Other function | C-axis control,Thread cutting |
Communication function | RS232 use MODBUS protocol |
Monitoring function | Speed Flux current Torque current Motor load current Switch-value input status display Switch-value output status display Control mode display |
Protecting function | Provides protection against: Over speed Main power over-voltage and under-voltage Over current Overload Motor over heat Big speed error IPM fault etc. |
Operation | Six LED digital tubes, two light-emitting diodes(LED), five bottoms |
Adaptive motor | 2.2KW~75KWAC servo spindle motor |
Use Environment | Use place | Non-corrosive, flammable gas, prevent conductive objects, metal dust, oil mist and liquid from entering inside the drive unit. |
Use Temperature Storage Temperature | Use temperature :0ºC~+40ºC,More than 40 ºC shall be derated. Storage temperature :-20ºC~+60ºC. |
Use humidity Storage humidity | Below 90% RH, non-condensing. |
Altitude | Below 1000m,Altitude above 1000m shall be derated. |
Vibration / impact resistance | Vibration Resistance 4.9m/S2 ,Impact resistance 19.6m/S2 |
ABOUT US HNC Electric is an automation & drive focused global company, providing global customers with control, display, drive and system solutions & other related products and services, under the support of its excellent electrical and electronic technology as well as strong control technical force.
HNC Electric listen and understand our clients requirement, by improving and upgrading our product functions and performance continuously , we provide and develop perfect products and solutions according to different requirement of the industry. Ourproducts have been used and applied successfully in packing, printing, textiles, plastic injection, elevator, machine tool, robot,wood cutting, stone carving, ceramic, glass, paper making industry, crane, fan & pump, new energy resources etc.
In order to provide more complete service and product for our customers internationally, meeting our customers expectations in the respect of time of delivery, solution support, after sales services and product customization support, HNC Electric has been searching for capable companies as our business partners, product agents and distributors, bringing good product quality and professional service to our clients globally. Up until now, we have already got customers and business partnerships built up in over 40 countries, which include Europe, North America, South America, Asian-pacific region, Middle East and Australia etc.
The superior quality and low cost of HNC Electric's product are benefited from the mature and complete manufacturing system and the efficient logistic of China. Our talented and sufficient manpower, our rich engineering experiences, drives our product to be more complete and better in the respect of functions and performances.
HNC Electric, your professional electrical partner !
CERTIFICATES
Address:
902, Hongshi Business Building, Private Scientific & Technological Park, Taihe Town, Baiyun District, Guangzhou City, Guangdong Province, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing, Textile
Company Introduction:
HNC Electric is an automation & drive focused global company, providing global customers with control, display, drive and system solutions & other related products and services, under the support of its excellent electrical and electronic technology as well as strong control technical force.
HNC Electric listen and understand our clients requirement, by improving and upgrading our product functions and performance continuously, we provide and develop perfect products and solutions according to different requirement of the industry. Ourproducts have been used and applied successfully in packing, printing, textiles, plastic injection, elevator, machine tool, robot, wood cutting, stone carving, ceramic, glass, paper making industry, crane, fan & pump, new energy resources etc.
In order to provide more complete service and product for our customers internationally, meeting our customers expectations in the respect of time of delivery, solution support, after sales services and product customization support, HNC Electric has been searching for capable companies as our business partners, product agents and distributors, bringing good product quality and professional service to our clients globally. Up until now, we have already got customers and business partnerships built up in over 40 countries, which include Europe, North America, South America, Asian-pacific region, Middle East and Australia etc.
The superior quality and low cost of HNC Electric′s product are benefited from the mature and complete manufacturing system and the efficient logistic of China. Our talented and sufficient manpower, our rich engineering experiences, drives our product to be more complete and better in the respect of functions and performances.
HNC Electric, your professional electrical partner!